I use my desktop PC for Jellyfin and torrenting, but I’m looking for something that I can keep on 24/7 that draws less power and run other self-hosted services on Linux. I would like to have at least 2x 14 TB 3.5" hard drives in or attached to it with the possibility of expanding in the future.

From my research, these seem to be some good options:

  1. Mini PC like this Beelink S12 Pro + USB hard drive enclosure. The price seems reasonable for the specs and low power consumption. Not sure if USB will limit transfer speeds.
  2. ODROID HC-4 or similar SBCs. I feel like these have much lower performance for not much price savings, and it’s harder to get software running up because of ARM. But it seems like they don’t use too much power.
  3. Used enterprise PCs/servers. I know they can be found cheap used, but I’m a little lost at comparing the performance and power draw to other options.
  4. DIY build. I’m interested in getting a Mini-ITX case like this Jonsbo N2 and getting parts for it, but it seems like it will be the most expensive option. It does seem like the most modular and upgradable.
  5. Classic NAS products like Synology. It seems like these are falling out of favor because they are pretty under powered for the price.

What does selfhosted think about these options, and what would you recommend?

  • 124816@lemmy.world
    link
    fedilink
    English
    arrow-up
    15
    ·
    1 year ago

    For the money: Used sff like an optiplex 7050 or similar for $100. Typically <20W, real computer performance, can handle a bunch of ram, pcie accelerators depending on what you get into. Add a multi drive enclosure for more storage when needed.

    • HumanPerson@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      This is what I did and I love it. I will add that sff is bad for upgrades. I wanted to add a gpu to mine and now I have to buy a larger case to put it in.

  • noja@lemmy.world
    link
    fedilink
    English
    arrow-up
    14
    ·
    1 year ago

    As I always say, have a look through https://forums.serverbuilds.net They have tons of guides on building whatever you need at whatever price point you can afford. The NAS Killer 5.0 is pretty great and I went with a second box for transcoding. Both low power and pretty cheap.

  • Decronym@lemmy.decronym.xyzB
    link
    fedilink
    English
    arrow-up
    18
    arrow-down
    5
    ·
    edit-2
    1 year ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    DNS Domain Name Service/System
    NAS Network-Attached Storage
    NUC Next Unit of Computing brand of Intel small computers
    NVMe Non-Volatile Memory Express interface for mass storage
    PCIe Peripheral Component Interconnect Express
    PiHole Network-wide ad-blocker (DNS sinkhole)
    Plex Brand of media server package
    RPi Raspberry Pi brand of SBC
    SATA Serial AT Attachment interface for mass storage
    SBC Single-Board Computer
    SSD Solid State Drive mass storage

    [Thread #77 for this sub, first seen 24th Aug 2023, 01:25] [FAQ] [Full list] [Contact] [Source code]

  • ThorrJo@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    12
    ·
    1 year ago

    Check out ServeTheHome’s “Project TinyMiniMicro” on Youtube for a great overview of ultra-small form factor (“1 liter”) business PCs.

    The big three PC makers each have standardized products in this form factor with (relatively speaking, compared to smaller manufacturers) tons of spare parts available.

    • jayemecee@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      This is the correct answer. And I think in September most companies do hardware refresh so keep an eye on ebay

    • Cenzorrll@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I hate to admit that I love using these micro business computers, but they’re pretty awesome. Stackable, powerful, upgradeable, cheap second hand or refurbished. I’ve considered nucs, but you can find buckets of these for cheaper.

  • qaz@lemmy.world
    link
    fedilink
    English
    arrow-up
    8
    ·
    edit-2
    1 year ago

    I set myself a budget of ~€150 and eventually settled on a Lenovo Mini PC with an i5 and 8 GB of ram for €160 including shipping. In retrospective, one of those Beelink mini PC’s would have been a better option, they use significantly less energy and have a better performance/price ratio.

    I recommend going with option 1.

    • subtext@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Just make sure you get an Intel box. If OP ever wants to use Plex it only plays nicely with Intel and Nvidia hardware transcoding.

  • bartolomeo@suppo.fi
    link
    fedilink
    English
    arrow-up
    8
    ·
    1 year ago

    I feel like a loser after reading some of these awesome setups, but i just use an rpi4 4gb. It’s enough for 1-2 ppl casual use as NAS, media server, nextcloud, pihole, and a few other things here and there. I have USB hub with it’s own power supply because if not the hard drives lose power occasionally. All in all it’s like 20W max but usually under 10. Best of all it’s completely silent.

    • tinysalamander@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Same. I’m using a 2012 Mac mini running Proxmox attached to an OWC Thunderbay 4. It’s old but does everything I need it to do.

    • brilokuloj@kbin.social
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      I just got into selfhosting with a used thin client (Dell Wyse 3040), only $30 on eBay. I don’t know what I’m doing at all and it’s still working out great for me so far, so I think that’s a good enough endorsement.

    • Anafroj@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      1 year ago

      I assume it’s a x86 CPU, being an intel processor? How does it manage to be as energy efficient as an ARM CPU? Or maybe it’s only when it’s idle?

  • uis@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    1 year ago

    I suggest you to look at SBCs:

    1. RockPro64
    2. Quartz64
    3. And many others

    I don’t find running them problematic, but this is maybe because I have crossdev on gentoo.

    Here’s how to install distro on sdcard for SBC:

    1. Partition sdcard
    2. Make devicetree file
    • For most SBCs dts files are already made
    1. Configure and install bootloader(e.g. u-boot)
    2. Unpack base system to sdcard
    3. Configure, compile kernel and then copy to boot partition(can be shared with system, bootloader must support FS)
    • Sh1nyM3t4l4ss@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      My home server is a RockPro64. I didn’t specifically buy it for that purpose but since I had it lying around I figured I might as well use it.

      It has a PCIe Slot which I used for a SATA controller, with two 3,5" HDDs.

      They have an official NAS case for it too, not sure I’d recommend it as it’s kind of expensive, doesn’t isolate HDD vibration / noise at all and isn’t very convenient to service (to replace the drives for instance). I’m not aware of a better case option for this board though.

      I run debian and OpenMediaVault on it (I didn’t have to mess with the kernel or device tree at all), with the ZFS plugin, and several docker containers (Jellyfin, PiHole, Syncthing, Tailscale).

      For my needs it’s working perfectly fine and doesn’t need much power. But:

      • It isn’t particularly great at video transcoding
      • 4GB of RAM isn’t a ton especially with ZFS, keep that in mind if you wish to run more / heavier services such as Nextcloud
      • being ARM based, this board basically limits you to OMV or manually setting up stuff on Linux through the CLI, as TrueNAS, Unraid and Proxmox only support x86. OMV is fine for it’s core functionality and you can get some more advanced features through plugins, but at that point it often gets kind of janky and annoying compared to e. g. TrueNAS. Also, the KVM plugin apparently doesn’t work on ARM.

      TL;DR these low power ARM boards are just fine as a cheap option for getting into homelab / Self hosting and I wouldn’t necessarily recommend against them, but sooner or later I want to build a low power x86 based NAS with more RAM, SSD cache and TrueNAS Scale instead.

  • Franzia@lemmy.blahaj.zone
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    As someone with a used 4U server… the noise, weight, cost, poeer consumption all are an inconvenience generally. I now have some mini PCs and I wish I started small and built up, rather than trying to treat myself with the best single solution possible.

  • Rykzon@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    Depending on power prices in your country I would take that into strong consideration, while some server or desktop grade hardware might be technically very good, they often have high idle power consumption without offering greater functionality.

    Take a look at this German Forum Post: https://www.hardwareluxx.de/community/threads/die-sparsamsten-systeme-30w-idle.1007101

    They also have this google sheet: https://goo.gl/z8nt3A

    • tehnomad@lemm.eeOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Yeah, the power prices in my city are really high (USA). They’re even higher than Hawaii, from what I’ve heard. That’s why I’m leaning towards the mini PCs and SBC options, even if used server/desktop parts have better performance for the price.

  • Meuzzin@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    1
    ·
    1 year ago

    Here’s what I did…

    JONSBO N1 Mini Itx Case 5 HDD (Size of your choosing) Mini Itx MB AM4 ~500 Series Best/Cheapest Amd Processor with GPU (I got a R7 3800G) 350w Itx PSU RAM of your choosing

    I use 2.5GBE for my network, so I just got a USB to 2.5GB Ethernet Adapter. So make sure the Mobo has USB 3.1 or 3.2, or a 2.5GBE Port. I bought most refurbished, or clearance. If you really wanna go crazy transcoding, you can pickup Tesla P4s for cheap on Ebay.

    It’s low power, small, and powerful enough to run the whole suite of Arrs*, Jellyfin, Jellyseer, etc., etc.

  • stonedemoman@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    1
    ·
    1 year ago

    I just decided to bite the bullet on paying for a Synology DS920+ and I don’t regret it at all. For media hosting on my scale, 4K direct or 1080p transcodes to 6 or less concurrent streams, it does everything I need it to do and it has pretty decent software.

    • subtext@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Only problem that I have with mine is it just doesn’t have the power to transcode audio flawlessly. I have a lot of DTS content and it just stutters all the time. I had to set up a Tdarr pipeline just to add EAC3 tracks to everything.

      • stonedemoman@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        I have not experienced this with any lossless transcodes and my friends streaming remote haven’t said anything about it. What client are you using to watch media?

        • subtext@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          1 year ago

          It was streaming locally from my 920+ directly to my LG tv using the official Plex app on the tv and the Plex docker container on the NAS with iGPU passthrough. Tried it in both mp4 and mkv formats. Since the tv doesn’t support DTS it was transcoding into (I think) AAC. When I would change the playback from DTS to any other codec (for files with multiple formats), the video would play flawlessly, it was just the audio transcoding.

          • stonedemoman@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            I think every time I’ve heard about the plex smart TV app it has not been positive lol

            Gonna be honest, I don’t know the exact logistics behind plex transcoding and what resources it may or may not use on the client and I’ve never tried a smart TV app as a client. I’m really not in a place to comment on it. But I can attest to having no issues when transcoding lossless formats to windows or the Nvidia shield.

  • ikidd@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    edit-2
    1 year ago

    I’ve been getting pretty excited about RISC-V devices. They are quite efficient and outstrip similiar SOCs in many ways.

    The Lichee Pi4A has better benchmarks than a Raspberry Pi 4 at a TDP of 4W and includes a NPU. They are coming out with a cluster board as well.

    Cristopher Barnatt does a review of it here: https://www.youtube.com/watch?v=1apoFXZ9ad8

    Since Debian has added RISC-V as a supported architecture, we should start seeing most major software like Docker and KVM being packaged for it. If not, it can be compiled too.