this kinda shit makes me understand the sovcit stuff a little more, “just send an email with this magic subject text and your rights are secured!”
this kinda shit makes me understand the sovcit stuff a little more, “just send an email with this magic subject text and your rights are secured!”
just a guess, but in order for an LLM to generate or draw anything it needs source material in the form of training data. For copyrighted characters this would mean OpenAI would be willingly feeding their LLM copyrighted images which would likely open them up to legal action.
SMS is literally the bottom of the barrel though
you need to look at the routing tables on your computer. these tables store the prioritized rules for how packets leave your host machine.
it might be that something is adding rules, or, there is some overly broad rule taking priority (like a rule that says all 10.0.0.0/8 traffic go to your home router over 192.168.69.0/24, etc)
it’s also suspect that you can reach the NAS over the 1gb card. That to me means one of two things:
ultimately, i suggest you run something like tcpdump
or wireshark on your computer (ideally on the NAS too) so you can start to visualize how the packets are being addressed and transferred over your networks.
sincerely, a fellow 10.0.69.0/24 enjoyer
I realize I’m late to this thread, but if you’re serious about archiving a VHS in the best manner possible, you have to go the RF capture route: https://github.com/oyvindln/vhs-decode
This method effectively captures the “raw” signal stored on the tape, allowing you to convert it after you’ve captured it however you see fit. You don’t have to worry about cheap digitizers/capture cards/etc distorting the signal.
no, and that’s be a pretty bad idea, you’re opening up all your internal hosts to the public internet.
a VPN is specifically designed to keep all your internal hosts off the public internet. When you authenticate with the VPN server the remote device you are using effectively “joins” the internal network, using the VPN to act like a tunnel between you and your network.
it has the benefits of better security as well as the fact that once you set it up, you can access any services you host, not just HTTP ones.
start with basics:
iperf
on every device you can between an external device and your internal host(s) and use it to find any bottleneckstcpdump
to analyze packets flowing over the network. you can often find surprising results this wayiperf
) with the most simple config (no nginx etc) and add the complexity of your config bit by bit until the issue returns