![](https://lemmy.world/pictrs/image/ca5022cc-9a35-44ba-8d19-761c8ca0e3b0.png)
![](https://lemmy.world/pictrs/image/8286e071-7449-4413-a084-1eb5242e2cf4.png)
At the risk of sounding like an oaf I just use an excel document, and these days I just keep it in nextcloud and edit it via a browser while in the driveway. Each car gets a sheet. Keeping it simple.
Reddit refuge, escentric engineer and serial hobbyist.
At the risk of sounding like an oaf I just use an excel document, and these days I just keep it in nextcloud and edit it via a browser while in the driveway. Each car gets a sheet. Keeping it simple.
I have so much trash on my network. For instance my security cameras are decentralized and we use tinycam on android to view them so I had to allow an exception for rtsp to get between the dirty iot WiFi and our normal WiFi. Our WiFi connected Bose speakers and Spotify is also another set of annoyance, they will only work if you try to connect to them from the same subnet via Spotify and app. I’ve tried to NAT the traffic and it didn’t work.
It’s going to haunt you for years. Wife: “why doesn’t this iot thing work?” Oh its on the wrong network. “I don’t understand it just doesn’t work”. Then I go add more exceptions in pfsense and the cycle continues.
Ditto, though I’m getting more and more resentful by the day at the lack of multi user support. I’m not going to donate to them again.
I hear ya but my instance is old (before i knew docker) and just works on the rails. I also tweak the heck out of it for performance so I deal with the annoyance once every two years. If it completely blows up I might roll it on docker.
I understand that everyone doesn’t always have a perfect experience but I’ve been using the same instance of nextcloud for over 8 years I just keep upgrading and migrating. It just works. Only issues I’ve had is when Debian withholds updating php for too long or when they finally do all the config files for php get fucked and I have to redo them all.
Here is the list!
1 x Samsung SSD 980 1TB
1 x Adata XPG SX8200 Pro 2TB
2 x Samsung SSD 870 QVO 8TB
1 x Western digital engineering sample. Cannot comment. 4TB
1 x Seagate Exos X16 14tb
My server is a ryzen 5600g based and has; 2 x m.2 SSDs, 3xSATA SSDs (20TB) and one spun down mechanical disk (14TB) and my total idle power is around 27W. The mechanical disk is the only notable load, unplugging it can save me 5W idle and when it spins up its about 15W total. I can give you specific model numbers if you like.
I’m sorry but wireguard is not easy for beginners and the quick QR code generator in the command line was fantastic and light years ahead of fumbling around with getting config files securely to a mobile device.
Been using afraid.org for well over 10 years and use dynamic dns to have various subdomains pointing to different IP addresses/hosts I have in physically different places. It just works and I login maybe once every 3-4 years.
Listen to this guy! Spot on. When I built my server I spent more time researching and paying for the PSU more than any other single part. Ended up with a Seasonic PRIME FANLESS PX-450. Server idles around 25W with a ryzen 5600g and 40TB of storage.
I’m going to have to give this a shot tonight, need to make a pfsense rule to allow the server to get out and then change its DNS. Regarding php, my current config is the following because I have over 64gigs of ram and went through great length to get Nextcloud to cache MORE into ram:
pm.max_requests = 50000 #set higher, the process is recyled after 50k calls to prevent memory leaks
pm.max_children = 1000
pm.start_servers = 60
pm.min_spare_servers = 30
pm.max_spare_servers = 120
So on your Nextcloud server you use an external DNS and it greatly sped up you nextcloud? Because I noticed a few years back mine got slow and I cannot figure out why. It was about the time I enforced pihole dns with pfsense. I might need to try this.
Do you know what it’s idle power usage is? I’m guessing below 10W?
Grav
+1 this is exactly my experience. My install must be 5-6 years old at this point and its on the rails. I’ve braved many php updates…
I noticed when they first spin up on boot they do some sub routine and they’re pretty loud and chatty. First time I heard it I was spooked but it worked fine and I just use it for backup so I just moved on. Once it’s on and in normal operation it’s like any other disk I’ve used over the decades. Nothing as loud as an old scsci disk or a quantum fireball.
It’s really boring, Debian 12: /dev/disk/by-uuid/8f041da5-6f7a-4ff5-befa-2d3cc61a382c { spindown_time = 241 write_cache = off }
I have an Exos x16 and x18 drive and they both spin down fine in Debian using hdparm. I use them for cold storage and they’re perfectly adequate.
I’d question that. I have three 3080 and they’re consistently about 8W each with one ssd and onboard graphics. I even went so far to splice three barrel jacks to a single 60w power supply that powers all three to avoid the losses of an additional 2 power supplies and this gets me the 8w idle power with Debian and throttling.